common Mechanical seal manufacturer Model damage and treatment

1、 Damaged environment of mechanical seal model

1. During the use of mechanical seal type equipment, the dynamic ring end face will be damaged or deformed.

2. If the face specific pressure of mechanical seal type equipment is too large Mechanical seal for kettle The model parts are in conflict, and the phenomenon of explosive burning deformation appears.

3. If the material of the seal ring of the equipment is not correct, it will affect the pressure of the equipment. If the pressure of the kettle mechanical seal model is not good, or if the V-shaped seal ring of the equipment is installed reversely, the seal ring will lose its sealing performance.

4. The axis and the end face of the stationary ring of the equipment reflecting the kettle mechanical seal model will show a large straightness difference.

5. Once the temperature of mechanical seal type equipment is unstable and the operating pressure is abnormal, hard particles will enter the conflict pair.

6. Do not exceed the guideline for the axle string.

7. The mechanical seal model will be damaged if the inlay seam of the adhesive or inlaid moving ring and the inlay seam of the stationary ring show leakage.

Mechanical seal

2、 Treatment method of mechanical seal model

1. If the conflicting pair is damaged, replace it, or grind it from the beginning.

2. Strengthen the cooling system, adjust the specific pressure properly, and take away the heat in time.

3. The device must be reasonable, and the sealing ring material must meet the pressing force.

4. The maintenance of the reaction kettle must be stopped, and it must be aligned from the beginning to ensure the straightness.

5. The technical policy shall be strictly controlled. Crystals and particles shall not enter the conflict side.

6. Fix the shaft, adjust the shaft, and make the shaft double the specification.

7. To improve the technology of this device, the adhesive should be robust.