夜上海最新论坛(中国)集团公司

[ common problem ] 205 type kettle mechanical seal

Structural features of 205 type mechanical seal for kettle: 205 type mechanical seal for kettle is double end face, multi spring unbalanced structure. The purpose of sealing is mainly achieved by the pressure difference between the sealing liquid in the sealing chamber and the sealed medium. The sealing liquid needs another set of device to circulate. The whole system is complex. Therefore, it is only used for sealing flammable, explosive, toxic and strongly corrosive media in special occasions. Friction pair
Published on: September 12, 2020 Clicks: 114

[ common problem ] Commissioning test of mechanical seal for double ended kettle (including 2001 and 2002 models)

Commissioning test of mechanical seal for double end kettles (including 2001 and 2002 models) (1) Static pressure test:. Cycle B
Published on: July 15, 2020 Clicks: 206

[ Industry News ] Instructions for use of mechanical seal for kettle

Instructions for use of kettle mechanical seal 1. Mechanical seal (end face seal) is a device to prevent fluid leakage, which is composed of at least one pair of end faces perpendicular to the rotation axis, under the cooperation of fluid pressure, elastic force of compensation mechanism and auxiliary seal, to keep sticking and relatively sliding. 2. Mechanical seal for kettle, applicable to all kinds of steel kettle, enamel kettle, glass lined kettle mixing shaft and
Published on: December 3, 2019 Clicks: 154

[ Industry News ] Advantages and disadvantages of mechanical seal for kettle

Advantages and disadvantages of mechanical seal for kettle 1. Advantages (1) The structure is reliable, and the leakage can be limited to a small amount. As long as the surface roughness and straightness of the main sealing surface can meet the requirements, and as long as the wear resistance of the material is good, the mechanical seal can achieve a small amount of leakage, even the leakage can not be seen by the naked eye. (2) Long life. In the mechanical seal, the main wearing part is the end face of the seal friction pair, because
Published on: July 23, 2019 Number of hits: 159

[ common problem ] Technical requirements of mechanical seal for kettle

The technical requirements of mechanical seal for kettle are that the seal ring is the general name of dynamic ring and static ring (the same below), and it is the main component of mechanical seal. To a great extent, seal ring determines the service performance and life of mechanical seal, so some requirements are put forward for it. There shall be enough strength and rigidity to avoid damage under working conditions (such as pressure, temperature and sliding speed), and the deformation shall be as small as possible,
Published on: October 15, 2020 Clicks: 91

label: