HU2 type multi spring single face mechanical seal
The size of HU2 mechanical seal conforms to ISO3069, DIN24960 and GB/T 6556 standards, with strong interchangeability, and can replace the imported mechanical seal 59U, M7N, etc. The auxiliary seal ring can be rubber O-ring, PTFE V-ring, PTFE wedge ring according to user requirements. The transmission sleeve, which has nothing to do with the rotation direction of the shaft, has uniform pressure, multiple spring compensation, unbalanced structure, and the moving ring part is pre assembled into one, which is simple to install.
The friction pair material and auxiliary seal material can be selected according to the actual working conditions.
The size of HU2 mechanical seal conforms to ISO3069, DIN24960 and GB/T 6556 standards, with strong interchangeability, and can replace the imported mechanical seal 59U, M7N, etc. The auxiliary seal ring can be rubber O-ring, PTFE V-ring, PTFE wedge ring according to user requirements. The transmission sleeve, which has nothing to do with the rotation direction of the shaft, has uniform pressure, multiple spring compensation, unbalanced structure, and the moving ring part is pre assembled into one, which is simple to install.
The friction pair material and auxiliary seal material can be selected according to the actual working conditions.
Product parameters:
Sealed medium: water, oil, acid, alkali, salt, non crystalline solvent, etc.
Seal chamber pressure: ≤ 1Mpa
Sealing chamber temperature: - 20 ℃~220 ℃
Linear speed: ≤ 15m/s
